Order Code: [CCTV-Test/LC] only
$349
Test - Aim Cameras &
Adjust Lens Focal Length - Iris - Focus without help, save time
by not having to move back & forth between Camera & Monitor
locations - ideal for setup of IP Network Cameras.
Camera & Lens setup
Monitor * Pan-Tilt-Zoom-Focus / Camera-OSD-setup controller *
Twisted Pair Network Patch Cable Tester.
This lightweight tool
is all you need for common CCTV & Network Camera & PTZF setup &
testing, it is easy-to-carry with 2.5inch (6.3cm) colour LCD TFT
screen, on-screen setup menu & display.
to view pages from
'User's Manual'
Setup: Menu-Driven On-Screen-Display
Test: RJ45 standard Local Area Network Cables
Function: 1 ~ 30 minute Battery-Saving sleep mode
Setup: Lenses / Cameras Focus - Adjust Focal
Length - Aim
Display: Composite Video from PAL & NTSC Cameras
or other sources
Access: Camera Setup menus using RS485
CALL 64, CALL 95 or other command
Setup Keys: Mode - Set - Power/Menu.
Function Keys: Open - Close - Far - Near - Wide - Tele - Up -
Down - Left - Right
Video In & loop-thru Out via BNC sockets. Network
test via RJ45. PTZF via DB9 (RS232) or press-to-release
terminals (RS485)
RS-485 Pan Tilt Zoom Focus Camera protocols:
Pelco-D, Pelco-P, Samsung, BEIEOT, A01, B01, Sanglin & Liling.
Baud Rates: 2400, 4800, 9600 & 19200 bps. Goto & Setup preset
range 0 ~ 255. Pan & Tilt speed range 0 ~ 64
Power Source
Two Removable Lithium rechargeable Batteries
or External 9 Volt
2.5 A DC Regulated Power Supply (not included)
with Center (+), 2.1 mm x 5.5 mm DC Socket
Image for
illustrative purposes only
Compatible with these RS485 Devices:
DomePTZ-2
DomePTZ-dn2
DomePTZ-3
DomePTZ-dn3
AutoCam-dn
Package Contents
CCTV-Test/LC
Neck Strap with Clips
Patch Cable BNC to BNC Plug
4 Rechargeable
Lithium Batteries
(2 Sets)
RJ45 Network Cable Test Terminator
BNC Socket on short Cable with Test Clips
Dual-Power (100~240 vac) or (12 VDC)
2-Cell Battery Charger
Operation Manual
this may be difficult to
understand due to poor translation
European & USA Mains
Power Cable also available
Need
More ?
Comprehensive Monitor & RS485 Analyser version
$499
|
Air